How Does a Septic Tank Work and Few Things to Keep in Mind

how does a septic tank work

About Septic Tank 

Have you ever wondered how does a septic tank work, and do you need to install it at your place or not? First, let us know what a septic tank is and what wonders can it do for us! In order to start the basic recycling of water, many people install these water chambers/tanks underneath their houses. 

What is a Septic Tank?

The septic method is used to treat the water efficiently at the site itself in order to shorten the period and cleanse the water then and there. Unlike the other water treatment plants, the water has to reach all the way there, and then the treatment starts. Overall, this process takes a long while, and also a lot of energy is going to waste as well. So, with the help of a septic tank, one can start the water filtration process right at the home level. The main element of the septic treatment is the septic tank. The tank lies underneath the house or facility right near or under the water source. Now that you know how does a septic tank works we can dig into the details. 

Here, we will share some tips that will help you understand the concept of septic tanks better, and it will also help you keep yours clean and run!

How Does a Septic Tank work?

The process of the septic tank and its filtration is quite simple. The tank can be made up of steel or even plastic. The main function of filtration is done with the help of sedimentation. Sedimentation is a process where the dirt and other impurities settle down in one place. When the dirt and other things float down, the water is taken out later.

The heavy impurities sink in and settle with the rocks. The lighter scum floats up with time, and the clean water lies somewhere in the middle. This is where the pipe pumps out the water. There are two tanks next to each other, in the same process repeats in some cases. Now let us know how once can keep their tanks in the best condition possible.

Check the Surroundings! 

how does a septic tank work

One of the most basic mistakes people make regarding septic tanks is that they don’t assess and check the surroundings beforehand. With this lack of assertiveness, the tank gets to take all the damage. As we mentioned earlier, the tank is quite big and contains large quantities of water at all times. Hence, even a slight change in the underground surroundings can damage the shape of the tank. The slight bend or damage to the tank can hamper the whole process, and the tank may need replacement on an immediate basis.

Don’t let it block! 

Another issue which a lot of septic tank owners face is the blockage issue. The pipes are thin and can face the issue of waterlogging easily. The best way to avoid all of this is to keep a check on what is going down the pipe. People flush out all sorts of things in the tube, like regular paper and other small bathroom waste. Well, due to this, the lines jam up easily, and then the water is unable to go there.

May Leak as Well! 

A lot of times, as the septic tank pipes are in constant pressure, the lines start leaking as well. It is very important to take care of the leak in the very early stage. If these pipes are kept without a check for a long time, there can be many problems in the long run. So, when the plumbing company is there for the installment, it is important to take note of the basic dos and don’ts of the septic tank. The leaks can cause a huge mess and may even let overflow if you check on them a bit too late.

Servicing is Important 

How does a septic tank work

To save a few bucks with the septic tank, people often let loose on the servicing part of the project. You must regularly service the tank as some elements of the tank need to be in check at all times! Moreover, the professional teams that come by to check on your tank may charge higher, but their job is extremely important and needs experience and skills.

In a Fragile Space! 

Also, what a lot of people fail to realize is that the location of the septic tank is also very important. If the tank is at a farm or any other outdoor location, then you will have to keep your tank safe at all times. Heavy Vehicles or movements can make disturb the core of the tank and may damage its structure. So, if the tank is not very deep in the ground and the space above it is open. Then, guard the tank with strong fences or warning signs!

Gas Issues 

Last but not least, the most common issue which causes a lot of problems is gas piling up inside the tank. Due to the water’s impurities and the tank’s minimum ventilation, gas can pile in there very easily. This gas can take a dangerous turn instantly. With the closed valves and constant stagnancy, the gas took over and filled up the tank in no time. This is why one should learn proper steps to let out the gas in time. And that to do that errand on a timely basis.

Vital Parts

Even if the service is due for a long time, make sure that you keep the vital parts of the septic tank. Several parts in the septic tank can make or break the entire system. So, if you don’t want to lose out on the time and effort, then it is best that you make a monthly tie-up with a professional company. By doing so, you can keep all the regular problems and worries at bay. For that, you need to know how does a septic tank work and functions. 

Conclusion of How Does a Septic Tank Work?

With all these pointers and info about the septic tanks, you can easily manage yours as well. Now you know how to do the septic tank work and the basics about it. However, if the tank is being problematic again and again, then replacing the tank might be the only option left. If the quality of the tank is not good, then it might not run for a very long time. Hence, the best way out of this is to replace it with a higher-quality tank. 

About The Author

Leave a Reply

Don't Miss! random posts ..